Skip to content

Bendi Articulating High Lift Models

Landoll BendiHiLiftAisleLandoll Corporation has develop a new mast design that has now been incorporated into 2 new High Lift models, B40AC-HL and B50AC-HL.  The new mast has a rigid mounting and as standard a tilting and side shifting carriage.  The new design offers increased mast rigidity, capacity and improved visibility.  Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast.   Lowered heights have been reduced and a new mounting position on the 42” (1067 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance.  Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available.

New model B40AC-HL. This new model is a scaled down version of the old B55AC-HL High Lift model.  Built on the smaller B40 chassis it has a fixed non-tilting mast and a tilting/side shifting carriage.  The rigid mast mount design prevents mast rocking and sway when handling loads at high elevations.  This makes handling loads at the higher elevations safer and easier for the operators.  Eight mast sizes are available from 312” (7.92 M) to 492“ (12.5 M).  This truck will have a basic capacity at 24” (600 mm) load center of 4,400 lbs. (2,000 kg) to 132“ (3.35 M) and a capacity of 1,500 lbs.  (682 kg.) to maximum lift.  With a 48” long x 40” wide load (1200 mm x 1000 mm) this truck will stack from a 78” (1.98 M) clear aisle.

Model B55AC-HL model number Changed to B50AC-HL.  The model B55AC-HL model has now been changed to a model B50AC-HL.  This new model designates the basic capacity of the truck which is now 5,000 lbs.  (2,273 kg) at a 24” (600 mm) load center to 198” (5.03 M).  This model will have a capacity of 2,000 lbs. (909 kg) at 24” (600 mm) load center to 492” (12.5 M).  With a 48” long x 40” wide load (1200 mm x 1000 mm) this truck will stack from an 84” (2.13 M) clear aisle.

For information contact Landoll Corporation, Marysville, Kansas
www.landoll.com
mhpsales@landoll.com
800 -428-5655 or +01-785-562-5381

Share on Socials!

Related Articles

Related Articles

Training Program Expanded with Addition of OSHA-Authorized Safety Courses

Training Program: Rockford Systems, LLC. announced today an expansion of its machine safeguarding training curriculum to include new training courses authorized by the Occupational Safety & ...
Read More

Pure Safety Group Leaders Take on Roles With Standards Organizations

Mathew Moreau, product manager of dropped tools and FME at Pure Safety Group (PSG), has been named chairperson of the International Safety Equipment Association (ISEA) Standards ...
Read More

Seven Secrets to Choosing the Right Barcode Labels

When using barcoding as a strategic advantage to automate your processes you expect the solution to perform as expected. However, the selection of the right barcode ...
Read More
Scroll To Top