Skip to content

Environmental Hazard Monitoring Expert Casella Announces 2022 Webinar Series on Noise, Air Sampling and Vibration

Global occupational health and workplace hazard monitoring expert Casella has announced its schedule of industry-leading webinars for 2022.

The schedule of free-to-attend, accessible webinars cover Casella’s areas of core knowledge, including workplace monitoring for noise, dust, gas and vapor hazards, as well as instrumentation usage and best practice.

In order to reach worldwide attendees, two sessions will be run on each date, with one taking place at 10am and a later session at 3pm to ensure learners across multiple time zones can benefit. Each webinar will conclude with a Q&A session to recap.

The webinar schedule is set to run as follows:

February 23 – Environmental Boundary Monitoring in Construction: Understanding Data

Parameters and data can be intimidating to those unfamiliar with environmental monitoring. This session will provide expert guidance on key parameters for noise, particulate and vibration so that site managers can know their Leq from their PM10 and PPV. Casella will also advise on how to use data to prevent potential complaints, saving site time and costs.

March 16 – Introduction to Air Sampling

Airborne hazards from fibers, gases, dust and vapors can all cause potentially life-threatening damage to worker health. This session will provide expert insights on monitoring workers’ exposure with guidance on equipment, current requirements and best practice techniques.

April 13 – Introduction to Noise at Work

This session will cover the different international workplace noise regulations, offering guidance on employer responsibilities and exploring ways that the use of noise dosimeters and sound level meters can support compliance.

May 18 – Introduction to Asbestos Sampling

This session will provide a quick insight into the international use of asbestos, both now and historically, its associated health risks and how to perform air sampling for asbestos. Attendees will be guided through the equipment and accessories needed with best practice advice on how to set up equipment.

June 8 – Setting up Air Sampling Pumps

Setting up air sampling pumps and their associated items is paramount to ensuring accurate exposure data. This webinar covers selecting the correct pump, setting up a ‘sample train’ and ensuring accurate flow, as well as best practice to ensure good quality data.

July 6 – Introduction to HAV Monitoring

Hand Arm Vibration Syndrome (HAVS) is a serious condition that can be prevented with the correct control of exposure. This webinar reviews the terminology around HAV measurement, legislation and exposure limits, as well as how to measure exposure on tools correctly and subsequently calculate exposure levels.

August 24 – Environmental Boundary Monitoring in Construction: Best Practice

Boundary monitors can measure dust, noise, ground vibration and wind parameters. Acquiring accurate measurements from these units is essential for reporting quality data and preventing environmental complaints. This session will cover the correct siting and installation of monitoring units to ensure compliance with guidance and legislation. In addition, attendees will gain a best practice understanding of sensor operation and maintenance.

September 14 – Introduction to Dust Sampling

This webinar will guide attendees through different facets of dust monitoring using air sampling pumps, including types of dust to measure and the selection of equipment, such as sampling heads or filters. Additionally, the webinar will cover how to calculate airborne concentration and exposure.

October 19 – Use of SLM’s and Noise Dosimeters

This session will guide attendees through the applications and uses of noise dosimeters and sound level meters, and the pros and cons of each. This webinar will also provide a best practice guide to getting the most from noise monitoring equipment, and cover the critical do’s and don’ts of instrumentation.

November 24 – Introduction to Sampling Gases and Vapors

Personal sampling of vapors and gases requires knowledge to select the correct sampling media and the right accessories and flow rates. This webinar covers sources of information, how to set up a ‘sample train’, and how to select the correct air-sampling pump and equipment calibration.

For more information, visit

Share on Socials!

Related Articles

Related Articles

How the A10 Standards Can Help Improve Construction and Demolition Safety

Construction and demolition sites can expose workers to a wide range of hazards that can lead to serious injuries and fatalities.  The ANSI/ASSP A10 series of ...
Read More

Columbia Machine, Inc., Welcomes Team Member

Columbia Machine, Inc., a leading palletizer systems manufacturer in North America, would like to welcome Jeff Dooley to the Palletizer Team. Jeff accepted the position of ...
Read More

After Customer Demand, ClearSpan Brings Back In-House Financing

ClearSpan Fabric Structures announced that they will now be offering in-house financing solutions. By offering low-interest financing programs, ClearSpan is investing in the growth of our ...
Read More
Scroll To Top