Skip to content

Tips for Longer, Safer Power Tool Battery Life

The Power Tool Institute has compiled a list of best practices for safer use of batteries and power tools.

Safe storage. Start by reading the manufacturer’s instruction manual – and only use original manufacturer’s system components of tool, battery and charger. Do not impact or damage a battery, use it solely for the defined purpose as specified by the manufacturer. If a battery has received a sharp blow, been dropped, or is damaged, discontinue use.

Regularly inspect batteries for signs of damage, such as crushing, cuts, or punctures. Be mindful of abnormal battery behavior, such as failure to fully charge or hold a charge, longer-than-usual charging times, noticeable drop in performance, liquid leakage from the battery, or melted plastic anywhere on the pack. These are indications of an internal problem.

Never modify, disassemble, or tamper with the battery because the performance can become unpredictable and dangerous. As a general practice, it is best to unplug battery chargers and remove battery packs from them when not in use.

Do not store batteries on their chargers. Always use and store the battery within the temperature limits stated by the manufacturer. Do not store in a closed location where sunlight may cause elevated temperatures, such as near a window or inside a vehicle. Do not store or transport the battery in a container with loose metal objects, such as coins, keys or nails, which may contact the terminals.

Safe response to overheating. Though batteries and chargers are safe to use when operated properly, in rare instances a battery may overheat. If the battery is exhibiting signs of overheating (flames, smoke, smoldering, or melting), immediate action is required. If connected to a charger when exhibiting signs of overheating, always unplug the charger first. After unplugging the battery charger, then pour copious amounts of water on the battery and then submerge the battery (including any attached tool or charger – do not directly touch/disconnect the battery) in a sturdy container filled with water. When transferring the battery, avoid direct contact with the battery (use a long-handled shovel) and use appropriate personal protective equipment to protect face, hands and body, since there is a risk that overheated batteries may vent, explode, or emit flame.

If the battery is exhibiting flames, continue using copious amounts of water until the flame is extinguished, then submerge the battery (including any attached tool or charger) in a sturdy container filled with water. If water is not available, dirt, sand or a conventional ABC extinguisher may be used in an attempt to smother and cool the battery  until water is available.

Keep the battery submerged, in a well-ventilated location, for at least 24 hours and at least 15 feet away from any combustible items. Contact the manufacturer for guidance on proper disposal.

For more information, visit https://www.powertoolinstitute.com.

Share on Socials!

Related Articles

Related Articles

Adam Meza Joins Enespro PPE

A premier electrical safety personal protective equipment (PPE) product line, Enespro PPE is pleased to welcome Adam Meza to the team as a Regional Manager responsible ...
Read More

Clever Design of R-Taso’s Industrial Walkway Solutions Significantly Reduces Their Carbon Footprint

CEO of R-taso, Ville Törmänen R-taso, a specialist in design and manufacture of industrial walkway solutions, announced it has calculated the carbon footprint of the company’s ...
Read More

Fall Protection: Proper Care & Cleaning is Vital

By: Maureen Paraventi It’s tempting, when a worker is about to begin a shift, for her to don fall protection equipment without carefully scrutinizing it. It’s ...
Read More

Follow WMHS!

Workplace

Construction
Ind Hygiene

 

Scroll To Top