Skip to content

OSHA Floor Marking Can Mitigate Hazards

Contributed by: Graphic Products

OSHA considers yellow lines the most convenient and inexpensive way to mark aisles and passageways. © dvoinik –

Modern workplaces, however safe they may be, are fraught with hazards. Forklifts, energized equipment, loading docks, busy warehouses and other hazards can make it difficult for employees to work and move safely throughout a facility.

To that end, floor marking for a factory is an essential component of a safe workplace. The lines, stripes and dots lining facility floors throughout the United States can create order, keep employees away from dangerous areas and mitigate hazards wherever possible.

Here’s a look at what OSHA has to say about floor marking, and how it can improve efficiency and increase safety in your facility.

OSHA Floor Marking Requirements

At its core, floor marking consists of lines and symbols, most commonly painted or taped on a floor, that help people move around a facility and avoid hazards.

OSHA addresses floor marking specifically in its standard on materials handling and storage (29 CFR 1910.176). There it states, “permanent aisles and passageways shall be appropriately marked,” though it offers few details or requirements.

Images courtesy of Graphic Products.

To clear things up, OSHA has offered interpretations expanding on these requirements. Interpretations state that:

  • Floor marking lines must be at least 2 in. wide to ensure maximum visibility, though the agency recommends lines to be 2 in. to 6 in. wide.
  • Aisles should be at least 4 ft. wide, orat least 3 ft. wider than the largest piece of equipment used in the aisle.
  • OSHA allows facilities with unusual surfaces (including dirt floors) to use flags, traffic cones, barrels and other similar methods as long as employees are trained on the system used.

OSHA Floor Marking Color Requirements

OSHA offers no requirements for specific floor marking colors; however, a 1972 OSHA interpretation states that lines meant to define aisles may be any color, provided they clearly lay out the aisle.

That said, the agency’s standard for safety color codes (29 CFR 1910.144) offers some guidance for establishing a color-coded floor marking system. It specifies that red and yellow must be used for marking physical hazards.

  • Red identifies fire-related hazards (including fire protection equipment and containers of flammable liquids), as well as emergency switches, bars and buttons on hazardous machines.
  • Yellow signals caution and marks physical hazards (including striking against, stumbling, falling, tripping and “caught in between”).
  • Note:This does not mean standard floor marking can’t or shouldn’t be yellow; OSHA said, ina 1977 interpretation, that “yellow lines are usually recognized as the most convenient and inexpensive way to mark aisles and passageways.”

Beyond these requirements, employers are free to use whichever colors they see fit for floor marking, provided they use the same colors consistently throughout a facility.

Mitigating Hazards with OSHA Floor Marking

Now that you know the floor marking basics, how can it protect employees from hazards? Here’s a quick rundown. Floor markings:

  • Separate workers from machines and moving equipment:Use floor marking to designate paths that protect pedestrians from forklifts, electrical panels, heavy machinery and other hazards.
  • Warn of hazardous areas:Keep employees safe on loading docks around dangerous equipment and around areas with exposed edges.
  • Provide instruction:Let employees know where to stand (or where to avoid) when operating heavy machinery and other equipment.
  • Improve forklift safety:Forklifts are fraught with hazards. Floor marking can establish pedestrian-only paths, keep employees away from imbalanced or unsafe loads and establish traffic controls for drivers.
  • Keep employees safe in low-light conditions:Phosphorescent floor marking can help employees find exits and equipment in emergencies and other low-light situations.

Improving Organization with OSHA Floor Marking

Floor marking isn’t just a great tool for mitigating hazards and improving safety; it can also improve organization and efficiency. Here’s how:

  • Establish traffic routes:Establish aisles for pedestrians and vehicles and direct the flow of traffic; doing so can help employees get where they’re going in a safe, efficient manner.
  • Use floor marking in your 5S system:The 5S system aims to improve efficiency, increase organization and reduce waste—all of which can be facilitated through floor marking.
  • Designate storage areas:Floor marking can cordon off areas meant for inventory, PPE, hazardous equipment, forklifts and other items. WMHS

Graphic Products helps companies cultivate safety, efficiency and communication in the workplace with innovative products and unrivaled customer service. The company’s products include floor tape, safety signage, printers and supplies and pipe markers. Visit the Graphic Products website for a free Best Practice Guide to Floor Marking and Floor Marking Color Chart.

Share on Socials!

Related Articles

Related Articles

ASSP Honors Bobick for Work on Safety Standards

The American Society of Safety Professionals (ASSP) has named Thomas G. Bobick the recipient of the 2024 Thomas F. Bresnahan Standards Medal for his extensive work in developing ...
Read More

Warehouse Safety Checklist: Fall Prevention

By: Kyle Krug, Contributor Workplace falls are one of the most common warehouse hazards, responsible for 23,490 injuries and 46 deaths in 2016 alone, according to ...
Read More

Looking into the Future of Helmet Safety

By Ryan Barnes, Contributor If you want to protect the brain during an impact you need shock-absorbing technology. The construction industry has the highest number of ...
Read More

Follow WMHS!


Ind Hygiene


Scroll To Top